Overview

                      The ATL-PG28CB smart switch comes with web-based user interface, 24 Gigabit PoE+ ports and 4 RJ45/SFP combo ports for high-speed Gigabit an
                      long-range copper or optical connections. With smart features in SNMP v3, PoE PD Alive Check, Dual Firmware, Voice VLAN, DHCP Snooping, QoS,
                      CoS, STP, 802.1Q VLAN, IPv4/IPv6, Port Trunk, IGMP v1/v2/v3 Snooping and Mirror, the smart switch provides a cost effective, reliable, scalable and
                      secure switch solution for SMB networks. The Edimax-specific long range mode enables power and data transmission to up to 200 meters at a speed
                      of 10Mbps, tailored for IP cameras and far away network device applications. The PoE also features auto detection and power backfeed protection to
                      efficiently provide power and, at the same time, avoid damaging the PoE ports. The ATL-PG28CB is the ideal solution to increase the distance/speed
                      of your network server and backbone connections.

        Gigabit High-Speed Connection

                    Complies with IEEE802.3/802.3u/802.3ab/802.3z Gigabit Ethernet Standards, the ATL-PG28CB features 24 Gigabit Ethernet ports for high-speed, large file
                    transfer and 4 SFP slots for long range optical fiber Gigabit Ethernet connections.

 

       802.3at PoE with Power Backfeed Protection

                    The ATL-PG28CB features 24 IEEE 802.3at Power over Ethernet (PoE+) ports which supply up to 30W of electricity per port and has a total power supply of
                   450W to power any 802.3at or 802.3af compliant power device. With PoE detection capability, the GATL-PG28CB is able to verify whether the connected
                   device is IEEE 802.3at or 802.3af compliant. If a PoE device is not detected, only network data will be transmitted. Moreover, with the PoE power backfeed
                   protection from the passive PoE injectors, the ATL-PG28CB is able to avoid damaging the PoE ports.

       Long Range PoE Distance Extension, up to 200 Meters

                  The long range mode provides extended power and data delivery distance to up to 200 meters while general Ethernet switches have a distance restriction of
                  100 meters. The long range mode operates on a per-port basis at 10Mbps full-duplex operation, ideal for devices such as IP cameras, IP phones and PoE-
                  enabled IoT devices at a remote location.

      Dual Firmware

                 The dual firmware feature allows switches to have two firmware in storage. You can denote one of these firmware as the active one and the other firmware as
                  the backup. If the active firmware faces problems, you can activate the backup firmware right away to reduce down time.

 

      Voice VLAN

                 Voice VLAN is a special function of ATL-PG28CB switch which allows network administrator to easily prioritize IP voice traffic from IP phone through the
                 access port of switch to enhance VoIP service. Voice VLAN also provides QoS to VoIP, ensuring that the sound quality of an IP phone does not deteriorate
                 when the IP voice  traffic is sent unevenly.

 

      DHCP Snooping

               The network security feature of DHCP snooping enables the prevention of malicious or malformed DHCP traffic or the mitigation of security risks from rogue
               DHCP servers. The feature monitors DHCP messages received from untrusted devices connected to a switching device in the network and protects integrity
               of legitimate DHCP server and its operations.